Автор работы: Пользователь скрыл имя, 19 Ноября 2011 в 23:23, курсовая работа
This is a common truth that the U.S. is the leading economic power.
U.S. is an influential leader of the world economy. U.S. is one of the largest in territory and population of the world. The level of development of productive forces, the size of its economy the U.S. far ahead of any of the other developed countries. Progress in the development of economic processes in the U.S. is one of the main generators of progressive shifts in the economy of the world. The situation in the U.S. is the "barometer" for the world economy directly affects the movement cycle and the changing economic situation in other countries, affects the structure of international economic exchange.
Introduction....…………………………………………………………………3
Chapter I. Economic development as a factor of external trade………………4
1.1. Industrial sector…………………………………………………………..4
1.2. Agricultural sector………………………………………………………...8
1.3. Services sector
Chapter II. Foreign trade activity(exports and imports of U.S.)……………..12
Chapter III. The system of state regulation of foreign trade in the U.S……...16
3.1. Regulation of import……………………………………………………16
3.2. Regulation of export…………………………………………………….18
Conclusion………………………………………………………………..…..
Bibliography…………………………………………………………………...
Appendixes ………………………………………………
The Department of Economics and International Economic Relationships
C O U R S E P A P E R
on the World Economy Allocation Course
on the subject “***
* ************* ******** * USA in the World Trade*
Student:
Nugaeva Karina,
1st year, 2 group,
the Institute of Economics
and International
Economic Relationships
Tutor:
Contents
Introduction....……………………………………
Chapter I. Economic development as a factor of external trade………………4
1.1. Industrial sector…………………………………………………………..
1.2. Agricultural sector………………………………………………………...
1.3. Services sector
Chapter II. Foreign trade activity(exports and imports of U.S.)……………..12
Chapter III. The system of state regulation of foreign trade in the U.S……...16
3.1. Regulation of import……………………………………………………16
3.2. Regulation of export…………………………………………………….18
Conclusion……………………………………………………
Bibliography………………………………………………
Appendixes ……………………………………………………..…………….
This is a common truth that
the U.S. is the leading economic power.
U.S. is an influential leader of the world economy. U.S. is one of the
largest in territory and population of the world. The level of development
of productive forces, the size of its economy the U.S. far ahead of
any of the other developed countries. Progress in the development of
economic processes in the U.S. is one of the main generators of progressive
shifts in the economy of the world. The situation in the U.S. is the
"barometer" for the world economy directly affects the movement
cycle and the changing economic situation in other countries, affects
the structure of international economic exchange.
The theme of the United States, namely, their foreign trade, and is
devoted to this work.
Subject of course work is relevant, because it is very important to
study the foreign trade of the United States as the largest trading
powers, which plays a very important role in world trade and surpasses
the volume of foreign trade all other economically developed nations
of the world.
The purpose of this course work is to study the U.S. position in international
trade.
Objectives:
1. Consider the structure of industry, agriculture and service sectors
in the U.S., as factors in the external trade.
2. Examine the U.S. foreign trade (exports and imports).
1. Economic development as a factor of external trade
1.1.Industrial
sector
Industry remains a very dynamic
area of the U.S. economy. America alone accounts for 34% of world industrial
production. U.S. industry consumes about 1/3 of raw materials mined
in the world. U.S. industry consists of three units of social production:
manufacturing, mining and electric power. The manufacturing industry
provides more than 80.4% of common industrial products. About 13% of
industrial production is created in the electricity sector.
Sectoral structure of industry largely operates on the world market
and depends on the supply of raw materials and energy resources from
other countries. The most rapidly in the U.S. are developing knowledge-intensive
industries and manufacturing, as well as industries that use the latest
technology and are the bearers of technological progress. High level
of development is also made companies that produce consumer goods, define
the standard of living.
U.S. industry is characterized by the fullness of industries, the high
security of natural resources and skilled workforce, advanced scientific
research base, as well as a large concentration of capital and production.
Apace evolving electric power industry, machine building and chemical
industries. Their collection of particles in the products of U.S. industry
more than 50%, they account for 60% of all investments in the industry.
From the natural resources of the largest share in the volume of mining
production in value terms (90%) were energy: oil, coal, natural gas
and uranium. About 75% of metal mining accounted for iron ore and copper.
However, up to 50% of the needs of the national economy in the mineral
raw material is met through imports. In particular, the U.S. does not
have the reserves of strategic metals such as chromium, manganese, tungsten,
cobalt.
The manufacturing industry provides more than 80.4% of common industrial
products. About 13% of industrial production is created in the electricity
sector. Rapidly develop the latest high-tech industries and types of
industries: microelectronics, laser technology, the production of fundamentally
new materials with predetermined properties, genetic engineering and
biotechnology, new manufacturing technology - robots, flexible automated
production systems, automated design, etc. The average annual growth
rate of production robots
constitute over 36%.
U.S. possess the most advanced oil refining industry. The refineries
are close to major areas of consumption of petroleum products - industrial
sites North East, Port centers where imported refined oil, along the
trans oil pipelines.
U.S. is the largest producer of electricity in the world. The structure
of electricity generation accounted for the highest percentage of heat
- 68,6% and hydro power plants - 20,2%. Special role played by nuclear
power plants. The first nuclear reactor in the U.S. and the world was
built in 1942 in Chicago. Power plant up 32,5% of world capacity of
nuclear power plants. In the future, nuclear power plants, the national
program the United States must produce nearly a quarter of the country's
electricity. Currently the U.S. operates 80 nuclear power plants. Most
hydropower plants are located on the rivers of Colorado, Columbia, Tennessee,
to Niagara Falls.
U.S. steel industry is based on large reserves of iron ore in the area
of Lake Superior, and coke coal Appalachian Basin. It also uses imported
ores, which are shipped from Canada, Venezuela, Brazil.
U.S. Steel is focused on the north east of the country, in the vicinity
of coal and coke deposition, iron ore. The main metallurgical area of
the country is Priozerny.
In non-ferrous metallurgy U.S. occupies an important place aluminum,
including the utilities (first place in the world). Complete plants
operate in the areas provided with cheap energy - for power stations
to Columbia and Tennessee. USA is also the first place in the production
of tin, the second - to lead.
On the basis of its own deposits smelted copper in Lakeshire (second
place in the world). Over the last decade, smelting of nonferrous and
rare metals moved into the sea ports, mainly the Atlantic coast (New
York, Philadelphia, Baltimore), which processed imported raw materials.
A promising area of development of ferrous metallurgy is Alaska, where
there are deposits of nonferrous metals.
Chemical industry is one of the leading industries of the United States.
The current structure of the chemical industry aimed at the production
of polymeric materials (synthetic rubber, chemical fibers, plastics
and synthetic resins), most of which are synthesized on the basis of
petrochemical raw materials.
Powerful chemical industry operate in Los Angeles, San Francisco. The
factories that produce chemical fertilizers, are available throughout
the U.S..
Mechanical Engineering is a leading U.S. industries, it produces almost
40% of industrial output.
In the U.S. there are tens of thousands of manufacturing plants and
thousands of companies, but control over production are only 500 of
them. The largest are the monopoly of automobile General Motors and
Ford Motors.
U.S., along with Germany and Japan have the full range of engineering
production. It was in Detroit came first (in the XIX century.) World's
largest cell of the automotive industry. This city is the capital of
the U.S. automobile industry. It is going to more than 3 million cars
annually. Large modern centers of the automotive industry is also New
York, St. Louis, Kansas City, Flint, Atlanta, Los Angeles, Lensigton,
Lansing, Dallas-Fort Wayne, Janesville, Baltimore and other (second
place in the world).
The second least important branch of engineering is aviaraketostroitelnaya
U.S. industry, whose centers are located in the Pacific states (California,
Washington).
In the central part of the country's major centers include St. Louis,
Columbus, and on the north east - New York, Boston, Gartfort (center
of production of aircraft engines). Large corporations who dominate
the airline business, is the Boeing (Seattle).
Electrical and electronic industry emerged in large urban areas north
and north east U.S. - Chicago, New York, where he has focused most powerful
scientific and technological capacity of States and the District of
Los Angeles, Dallas, Houston, New Orleans. U.S. retain lead to the production
of computers, producing more than half of all computers in the world.
Among the light industries most advanced U.S. textile and leather and
footwear. Today markedly increased particle fabrics that are made on
the basis of artificial and synthetic fibers and fabrics combined, whereas
the production of woolen fabrics is reduced.
The food industry is dispersed throughout the United States. Some of
the important branches of the U.S. food industry are meat, dairy, canning,
flour milling, and production of alcoholic beverages. Major center of
the food industry are the big cities.
Agriculture is an important
branch of the U.S. economy. It provides not only the domestic needs
for food, but a significant amount of its exports - primarily wheat,
coarse grains, soybeans.
The share of agro-industrial complex (AIC) in the U.S. gross domestic
product exceeds 20%. In this area quickly increases performance. American
farmers have reached the world's highest productivity. One farmer meets
the needs of agricultural products 59, while in Western Europe - 19
people in Japan - 14. This is facilitated by the use of complex and
highly productive agricultural machinery, a high level of infrastructure
development (including the transportation and storage of products),
as well as protection and state support of agricultural production.
The cost of implementing state programs in agriculture and food constitute
4,5% of all expenditures of federal budget dollars.
In the U.S., development of grain farming, cultivation of fodder and
industrial crops, horticulture and gardening. This is facilitated not
only the moderate and subtropical climate, fertile soils, flat terrain
of central, eastern and some western areas, and especially entrepreneurial
U.S. farmers.
For the United States is characterized by a waist placement crops. Along
the border with Canada, from Lake Superior to the Cordillera, is wheat
belt. To the south of it, between the large lakes and the river Ohio
to the east, through the city of St. Louis and Kansas City in the south
to the Cordillera stretches of corn-soybean belt. Middle Atlantic coast,
middle and southern Appalachian Mountains and plains, which are adjacent
to them are old tobacco belt. The Florida peninsula and the Gulf Coast
took a cotton belt. The foothills of the Cordillera are used as pasture.
U.S. produce more than 16% of grain in the world. Such a high rate of
growth took place due to crop improvement. The structure of the gross
harvest of grain most weighty importance are maize (first place in the
world) and wheat (third place).
Gross grain harvest - 62.7 million tons - a third figure in the world
after China and India.
Important food crop is soybeans, which are grown in most areas suitable
for cropping (first place in the world).
In the arid southern Great Plains cultivate drought-resistant forage
crops - sorghum (22,5% of world production). Product rice harvest is
over 9 million tons (the eleventh largest in the world). Tobacco farms
are most common in the Appalachian regions (North Carolina). Peanuts
are grown primarily in southern states (Georgia).
Plantations of sugar cane available in Florida, Louisiana, and Hawaii
(mass gathering reeds USA to ninth place in the world). Sugar beets
are grown in California, Idaho, North Dakota and Minnesota. As the yield
of this culture of the U.S. took third place in the world after France
and Germany.
Vegetable and potato and horticulture, mainly concentrated in the western
U.S., especially in California. Here, in the subtropical climate, grow
tomatoes, citrus, grapes, fruits and vegetables. The second area of
horticulture and vegetable production is in Florida. Gardening is also
developing in the temperate zone - on the shores of the Great Lakes,
in the industrial zone. Crops of potatoes dominate in the states of
Idaho and Washington.
Livestock is the U.S. beef, focusing mainly on the domestic market.
As the number of cattle the U.S. ranks fourth in the world, and pigs
- the second.
In the United States intensively poultry, especially industrial fattening
chickens (broilers). Popular among Americans is the meat of turkeys,
which are grown annually about 300 million pieces.
An ornament of American prairie are the horses on the mountain pastures
of the West sheep.
Rapidly increasing share of
services in GDP: the proportion is about 65% (excluding the transport
and communication). The share of employment in this industry is approaching
75%.
American statistics include the scope of non-material production and
services, transportation, communications, wholesale and retail trade,
public
food, financial and credit activities and insurance services
industrial and domestic purposes, education, health, part science, public
economic administration, as well as activities of the military and police,
political, ideological and propaganda apparatus.
Over 25% of all intangibles account for the provision of financial services,
insurance, real estate operations. About 22% of services created in
the wholesale and retail trade. 26,3% of this business, legal, social,
personal services, health, recreation and entertainment, car, etc. share
of transport and communications is 8,5%, and government has 18,4%.
Investment in computers and communications in the late 90's. grew annually
by 25%. Through these investments provided about 1 / 3 of U.S. economic
growth. Each year, American businesses invested about 220 billion dollars
in computer technology and the latest communication and another 10 billion
dollars on software.
Of great importance for the economy are transport services. In the U.S.,
developed all kinds of transport, the country has excellent modern transport
infrastructure. In the sphere of cargo transportation is dominated by
rail, and passenger traffic are the most important road and air transport.
Transport complex plays an important role in the economic and social
life. The length of the railway network in the U.S. is about 265,000
km., Roads - 6 500000 km. The share of transport accounts for about
20% of total energy consumption in the country and from 50 to 60% of
the total consumption of liquid fuels. By the transport sector include
the U.S. public transportation - rail, road, maritime, inland waterway,
air and pipeline. Much of the cargo and passenger transport industry
performs, individual cars, personal aircraft, etc.
Material and technical base of the transport complex is mainly modern,
characterized by high capacity and high quality. Widely implemented
automated systems management transportation process using computers,
microprocessors,
fiber optics, lasers, artificial satellites and other things.
The most important direction to improve the quality of transport services
is the introduction of traffic "just in time", the filing
of freight rolling stock up to a minute. This allows the customer to
do without expensive storage devices and reduce the need for working
capital.
Transport is increasingly becoming an organic part of
complex production and transportation system, covering the entire economy,
which significantly increases the efficiency of the latter.
2. Foreign trade activity(exports and imports of U.S.)
Under the export means export from the country produced, grown or harvested locally produced goods. In this case the goods are of domestic origin and goods of foreign origin that are imported into the country and subjected to processing, modifying their basic quality or technical specifications, and re-export. The result of exports of goods decreased national stockpiles of wealth.
Under the import means import
goods into the country. In imports include imported goods destined for
domestic consumption, re-exports, and goods purchased for domestic institutions
abroad. As a result, imports of goods increased national stock of wealth.
U.S. is the largest exporter and importer in the world. The relationship
of leadership and partnership in the field of world trade developing
between the United States, Western Europe, Japan and catch up with them
the newly industrialized countries. Initially, there was an absolute
predominance of the United States, and then increasing as the economies
of other participants, the relationship developed into a competitive
partnership in which the United States to partially give up their share
of influence rivals, moving at the same function leading to a higher
level. The main imports are machinery and equipment, automobiles, energy,
aviation equipment, basic chemical products, food, clothing, electronic
products and manufacturing industries. Main partners U.S. exports are
Canada, Japan, Mexico, Britain, Germany, Korea and Taiwan. The basis
of export expansion of American monopolies is vehicles, equipment, aviation
equipment, chemical products and pharmaceutical products. America alone
accounts for as about 20% of world exports of high-tech industries.
Importing a large number of electronic components, consumer electronics
and computers. Critical to the U.S. has and the fact that they accounted
for nearly half of annual world grain exports. U.S. is the world's largest
exporter of capital. The profits on direct investments abroad are also
an important source of funding for economic development the U.S., they
make up one third of total profits of American corporations. In the
export of services is dominated by financial, management, transportation,
medical, educational and consulting services. Increased production of
goods and services sold on foreign markets is one of the main factors
of the American economic growth. Approximately one third of annual GDP
growth of the country is due to export production in high-tech, high-productivity
sectors of economy. Imports to the U.S. economy is even more important
than exports. Machinery and equipment give 2 / 3 of growth of U.S. imports,
the share of cars and consumer goods accounted for a quarter of growth.
The main countries exporting goods and services to the U.S. market is
Canada, Japan, Mexico, China, Germany, Taiwan and the United Kingdom.
The Nation’s international trade deficit in goods and services increased to $39.7 billion in February 2009 from $37.0 billion (revised) in January, as imports increased more than exports.
Figure 1. Goods and Services Deficit
Increases in February (2010 est.)1
Goods and Services
3. The system of state regulation of foreign trade in the U.S
3.1. Regulation of import
Application of measures of
tariff regulation for importing goods into the U.S. based on the Customs
Tariff.
Rate provides three modes of taxation of goods. The first applies to
countries that use non-discriminatory treatment in the United States,
also called most favored nation (hereinafter - MFN). Envisaged its own
tariff rates are set in accordance with international agreements concluded,
as a rule, the GATT / WTO (GATT-94 - General Agreement on Tariffs and
Trade, since 1994 - World Trade Organization). The second mode provides
for preferential rates (from low to zero), as applied to certain categories
of countries or commodities. They are used to developing countries (under
the system of generalized preferences), although not all goods shipped
in the U.S., as well as countries with which the U.S. signed a free
trade agreement (Canada, Mexico, Israel, Jordan) or any other agreement
special trade regime (the Caribbean countries, the Andean countries,
some African countries). In addition, partially or fully exempted from
customs duties for imports of American goods in the U.S., previously
exported abroad and returned as unchanged, and after some processing,
including assembly, as well as goods imported by tourists. This also
includes the import of civilian aircraft, regulated by an Agreement
concluded under the WTO.
The third regime for imports from countries not using the U.S. National
Library of Russia.
Distribution of MFN to any mills without the need for special agreements
with them, but in the U.S. legislation specified certain standards and
criteria by which individual countries can be unilaterally denied MFN.
Rates of duties in the Customs Tariff U.S. strongly differentiated according
to individual products and, as a rule, increases with increasing degree
of processing of goods. Commodities imported mostly duty-free, most
the same high rates apply to manufactured goods, especially consumer
goods.
As the reduction of tariffs and the role of the constraints of foreign
competition regulators in the U.S. market are increasingly playing a
non-tariff barriers (hereinafter - NTBs).
The most rigid of their kind - a ban on importation of goods that may
be imposed for reasons of national security and foreign policy interests
of the country. Currently, the prohibitions apply to trade with Cuba,
Iran, Libya. Citing national security concerns, the U.S. president may
restrict imports of certain goods and for purely economic reasons -
for example, it is so often limited to the importation of U.S. oil and
petroleum products.
More widely and regularly used quotas, which are a means of protecting
domestic industries and enterprises can not compete with imported goods.
Until recently, the U.S. is often used as NTBs and the mechanism of
the so-called "voluntary" restrictions implemented by exporting
countries, in agreement with the U.S. authorities and its input, usually
under the threat of coercive restrictions on imports.
Currently, the main means of limiting the importation of certain goods
(primarily non-ferrous metals) in the U.S. are anti-dumping and countervailing
duties.
A special system of protection of the national market of foreign competition
also operates in the field of agricultural trade (agricultural protectionism).
A relatively new element of NTBs are rules of origin of goods, imposed
to ensure that preferential regime in the framework of NAFTA, they could
not take advantage of exporters 'foreign' countries. Hidden or indirect
restrictive may have other NTBs - technical standards, sanitary and
environmental norms, customs formalities, etc.
Информация о работе США в международной торговле – USA in the World Trade